BMDMM - TIN LEAD ANTIMONY ALLOY,XM-200 CORE

Product Identification

Product ID:TIN LEAD ANTIMONY ALLOY,XM-200 CORE
MSDS Date:05/01/1990
FSC:3439
NIIN:00-153-4280
MSDS Number: BMDMM

Responsible Party
GARDINER SOLDER CO, DIV OF GARDINER METAL CO
4820 S CAMPBELL AVE
CHICAGO, IL 60632-1416
US

Emergency Phone: 312-847-0100/CHEMTREC 800-424-9300

Info Phone: 312-847-0100

Cage: 56244

Contractor
GARDINER SOLDER CO, DIV OF GARDINER METAL CO
CHICAGO, IL 60632-1416 US

Telephone: 312-847-0100/800-424-9300(CHEMTREC)

Cage: 56244

Ingredients

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 5- 94.8%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 5- 94.8%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192


ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0.2 - 2%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ROSIN ACID/ROSIN

CAS: 8050-09-7

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE AND CHRONIC- HEALTH STUDIES HAVE
SHOWN THAT POTENTIAL HEALTH RISKS MAY VARY BY INDIVIDUAL. ALWAYS
MINIMIZE EXPOSURE AS A PRECAUTION. INHALE: MAY CAUSE RESPIRATORY
TRACT IRRITATION. EYE: MAY CAUS E IRRITATION. SKIN: MAY CAUSE
IRRITATION & BURN.
Explanation of Carcinogenicity:CONTAINS LEAD
Effects of Overexposure:METALLIC TASTE IN THE MOUTH. IRRITATION OF THE
RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:RESPIRATORY/LUNG CONDITIONS

First Aid

First Aid:GET MEDICAL CARE. EYES: FLUSH WITH WATER FOR 15
MINUTES,HOLDING EYELIDS OPEN. SKIN:FOR BURNS,COOL WITH COLD WATER.
INHALATION: REMOVE TO FRESH AIR. PROVIDE CPR/OXYGEN IF NEEDED.
INGESTION: IF CONSCIOU S, DRINK LARGE AMOUNT OF WATER. GET MEDICAL
HELP IMMEDIATELY.

Fire Fighting

Flash Point:NONE
Extinguishing Media:DRY SAND, DRY CHEMICAL. DO NOT USE WATER.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:COLLECT AND USE. IF CONTAMINATED OR IN SMALL
PARTICLES, VACUUM OR COLLECT MATERIAL. NEVER USE ANY METHOD WHICH
GENERATE DUST.

Handling

Handling and Storage Precautions:STORAGE- KEEP AWAY FROM MOISTURE &
STRONG OXIDIZERS.
Other Precautions:LEAD WARNING LABELS. KEEP OUT OF REACH OF CHILDREN.
FOR INDUSTRIAL USE ONLY. DO NOT TAKE INTERNALLY. DO NOT GENERATE
DUST. DO NOT BREATHE DUST OR FUMES. AVOID CONTACT WITH DUST OR
FUMES.

Exposure Controls

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED. USE
NIOSH APPROVED RESPIRATOR FOR EITHER ORGANIC VAPORS, DUST/FUME
(HIGH EFFICIENCY FILTERS) OR BOTH IF TLVS ARE EXCEEDED.
Ventilation:LOCAL DUST PICK UP AND VENTILATION RECOMMENDED.
Protective Gloves:HEAT RESISTANT DURING SOLDERING
Eye Protection:FACE SHIELD/GOGGLES DURING SOLDERING
Other Protective Equipment:INSTALL EYE WASH STATION.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:2516F,1380C
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Vapor Pres:1 @ 1626F
Spec Gravity:7.55
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GREY SOLID, ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:TOXIC METAL FUMES ABOVE 1000 C (1832
F).

Disposal

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.